[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 6 Aug 2001, at 21:03, Mark Healey wrote: > Actually I had some mixed up. It is the one that b comes out of > the harness where the ones that go to the TVS, cold start valve and > a bunch of grounds do. It is two wires going to a singel > connector. The old one goes throgh the front firewall to where? I can look at a 71 harness tonight. If you can see a number printed on the white wire just about 1/2" back from the crimp connector, that would pin it down for sure. Is this a bare crimp connector or is it in a plastic insulating holder? About how long is this wire after it breaks out of the main FI harness? Does it have an extra vinyl cover for most of its length or is it just a short single insulated wire? - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe