[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sat, 4 Aug 2001 15:10:33 -0600, Jim Adney wrote: >On 5 Aug 2001, at 10:38, Mark Healey wrote: > >> On Fri, 3 Aug 2001 22:31:39 -0600, Jim Adney wrote: > >> >The FI wiring harness has 2 wires that break out near the # 3 cyl. >> >These connect to 2 wires that break out of the main wiring harness >> >near the same point. The latter 2 wires come from the main power >> >relay under the back seat, near the voltage regulator. >> >> The wires on my "new" harness aren't nearly long enough to reach that >> far. Is ther some kind to terminal block inbetween voltage relay and >> the FI harness? > >I think you need to read this more carefully. The wires you're >looking for have probably been cut off where they used to exit from >the main wiring harness in the engine compartment. Actualy I had some mixed up. It is the one that b comes out of the harness where the ones that go to the TVS, cold start valve and a bunch of grounds do. It is two wires going to a singel connector. The old one goes throgh the front firewall to where? Mark Healey 71 FI auto square 71 FI manual square marksvw@healeyonline.com ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org