[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: (T3) oil strainer setup


Jim,Russ(everyone actually) yes the filter system has a flow rate equal to or 
greater than a stock oil screen(the element is "woven" to 3 or 4 times the 
surface area of a conventional stock screen), it incorporates a bypass valve 
(sits right below the filter)and also uses a magnetic pickup plug on the 
bottom of the "sump".
Been running this setup for the last ten years with no oil starvation 
problems at all,and when I did pull it just to see,it was totally clean 
except for little tiny bits of debris(really small-would definitely have gone 
through the stock screen) I was very impressed for sure,and highly recommend 
them.
The setup is from C.B. Performance,Farmersville,CA. and they call it a "Maxi 
Filter Sump" system.Ran about $60.00 back then-they've come down a bit.
Cheers all
Chuck '66 SB MT 1776 (as of 4/28!!!)

P.S. You guys back east should consider stainless steel pushrod tubes....
P.S.S. Good one Dave!

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]