[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
O.K. Let me start by saying Jim and Russ were right, the Valve body in my Auto trans didn't come w/a 3rd/2nd gear control valve spring. Once I got my wrecker Valve body apart I could see the obvious differences. My questions are in regards to part #'s. O.K. here we go: 003 325 105 3d (my Valve Body) 003 325 105 1d (wrecker Valve body) 003 325 283 (both transfer plates) 003 325 327 2a (my Governor) 003 325 327 1b (wrecker Governor) What I want to know is will the Valve body/Governor from the wrecker work in my tranny? And would it be a good idea to use that one instead of mine? Would it be better? It has a different 3rd/2nd gear control valve that does have the spring that is shown in the Bentley Manual. Other that that, they look identical. Also can I find out by the part #'s what year my wrecker tranny actually was? I don't have the tranny case, just the internals. And is there any way to be sure my Valve body/Governor is a matched set or if the one from a wrecker is a matched set either? Thanks for listening. Greg Mielke Alberta, Canada '73 Auto Fasty '66 Beetle _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe