Re: engine removal

[Steven Ayres <comwest@well.com>]

MikeW=> Seems like not possible to undo engine without pulling exhaust 
     => first. Yes or no?

It really depends on how straight your rear apron is. It's a little 
tricky to get it all out of there together, but it can be done, and it's 
a whole lot easier to mess with the exhaust/heat system when it's all 
off the car. 

=> Supporting transmission: How strong a chain do I need? 

A chunk of clothesline would probably do fine.

=> About how long for either end? 

Leave the front end where it is, just block up the engine end.

=> As long as engine is out, are there any EASY things I could also be 
=> checking?

Clean engine bay
Check electrical connections
Check CV/swing-arm boots
Adjust rear brakes, check for leaks
Check brake lines and connectors for leaks, cracks, wear
Check transaxle oil level
Check shifter linkage 
Check clutch, TO bearing and TO arm for wear
Check front of engine for leaks: need a new front seal?
Check fuel lines for aging and wear
Take a good close look at all fuel- and air-related boots & hoses
Check head-nut torque
Check valve-train torque
Check/fix exhaust leaks
Generally look closely for stuff getting loose and dirty

Steven Ayres, Prescott AZ
'66 KG1600

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe