RE: [T3] Front Wheels Problem

[Andrew Riley <AndrewR@ahsl.co.nz>]

are they wider tyres??  that could be the problem

but i found on my 65 that the lower arms have a bump stop on the outer edge
to stop the wheel tunrning to far- it wears out - and that caused the rub -
plan  of attack - drill and tap and place a section of hard plastic down
with the cap head bolts recessed - and linish to shape - sounds complicated
- but is pretty straight forward

cheers
andrew

> -----Original Message-----
> From:	Mark Healey (formerly AKA Edmond Dantes) [SMTP:marksvw@home.com]
> Sent:	Thursday, March 23, 2000 4:40 AM
> To:	It's a list
> Subject:	[T3] Front Wheels Problem
> 
> When I make a hard right I hear the wheel rubbing something.  If I turn it
> back
> to where it isn't rubbing and go over a bump I hear the wheel bump and rub
> again.  As I look through Bentley I see a bunch of special tools.  Is this
> something I should just take to a pro or is there something I can do
> myself?
> 
> Mark Healey (formerly AKA Edmond Dantes)
> 71 Auto FI Square, 71 Manual FI Square.
> San Diego.
> 
> -------------------------------------------------------------------
> Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe