[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [T3] Front Wheels Problem
On 22 Mar 00, at 11:39, Mark Healey (formerly AKA Edmond Dantes) wrote:
> When I make a hard right I hear the wheel rubbing something. If I
> turn it back to where it isn't rubbing and go over a bump I hear the
> wheel bump and rub again. As I look through Bentley I see a bunch of
> special tools. Is this something I should just take to a pro or is
> there something I can do myself?
You can read the front wheel alignment section in the Bentley and
see where it tells you how the lower ball joints should always point
forward and only the uppers should be adjusted. Check yours to
see if they have been done wrong (they almost always have been!)
If they are wrong you will need to copy those pages and take
everything to an alignment shop where you can try to explain what
they need to do to do it right. If you are successful, they will believe
you and follow the instructions. If they don't seem inclined to do it
by the manual, look elsewhere.
Even if the alignment is correct, the front tires may rub. For this
VW made a clip to attach to the lower trailing arm to limit the
steering travel. I have never seen one of the official VW ones, but I
have made something myself that worked just fine. Just look at
what hits what to stop things at full steering lock, then wrap a
"shim" around the lower arm to make that stop happen sooner.
-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe