[T3] 6 VDC to 12 VDC (more)

[Bob Perring <perring@pdq.net>]

I spoke with Compu-Fire,  http://www.compufire.com/
and was told that their VW drop in module to replace distributor points 
has worked successfully for others with 6 VDC systems.

I'm gonna give it a try.

If it turns out that I should have problems with the lower 6 VDC not 
properly triggering the switching components in the module, I can 
always use a 6 VDC to 12 VDC conversion 
module  http://www.antiqueautomobileradio.com/  ahead of the module,
and between it and the #15 Coil terminal so as to properly feed 12 VDC 
to the module triggering circuitry.

Not knowing just exactly what I will get from the DC voltage conversion 
module in the way of output purity, I think I will rig up a test stand 
so as to be able to allow me to check the 12 VDC output on an 
oscilloscope.

Now, with all these grand ideas in my brain, watch the dern module, for 
whatever reason, not fit inside a stock 1964 dizzy.
Bob Perring
=====================================
"A Ras Mass is a High Mass"
  __________
 (E[__][__]|[_]\
 |   __ |    *|__||]
=-/(O)\-----/(O)\=
Home of:  Casper, der Freundliche Bus  & Otto, der Auto
mailto:perring@pdq.net
Home Page: http://freeweb.pdq.net/perring


-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org