[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [T3] No Reverse
I have a similar problem but only after a hour of driving - the reverse
scratches (like the clutch doesn't disengage , tried tightening the cable
made no difference. Not only that the shifting is often hard , though that
maybe shifter adjustment .
Any ideas ?
Herman
-----Original Message-----
From: Erkson, Toby <toby.erkson@intel.com>
To: type3@vwtype3.org <type3@vwtype3.org>
Date: Ý 06 ¿ 2000 19:24
Subject: RE: [T3] No Reverse
>This happens on cars with carbs as well...I know!
> Toby Erkson
> air_cooled_nut@pobox.com <-- Please use this address for email
> '72 VW Squareback 1.6L bored and stroked to 2.0L, Berg five-speed
> '95 VW Jetta III GL 2.0L, P-Chipped, Jamex sport suspension
> Portland, Oregon, http://www.icbm.org/
>
>>-----Original Message-----
>>> So I put it in neutral and it started right
>>> up, push in the clutch, put it in reverse and it dies again. What in
>>> the world did I miss on this one??????
>>
>>You probably have the wire to the back-up lights connected to the
>>wrong side of the coil. They should connect to the hot side, not the
>>side that goes to the dist.
>
>-------------------------------------------------------------------
>Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe
>
>