RE: [T3] electric fuel pump cut off, possible solution

["Jaranson, John (J.W.)" <jjaranso@ford.com>]

Oops! I missed the P.S.

Instructions for installation......hmmmmmm

it is pretty basic.  Just mount the switch in with the button on top.  It is
held on by two screws that go through a couple of molded in bosses.  You
just need to find a convenient place to mount it that is near by the wiring
to the fuel pump.  I think it is only one wire in and one out so it should
be pretty simple.  Just splice it into the existing fuel pump wiring.  I
think there is one of those molded plug-in wiring connecters for the switch.
You might ask the dealer for one of those too or just snip the wires at the
junkyard and take it with you.

I will check the drawing again to confirm the wiring and stuff, but it is
pretty simple.

How's that?

Later,
John Jaranson
'71 FI Auto Fasty
http://hometown.aol.com/jaransonT3


-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/