Re: [T3] Radar Detectors

["Dave Hall" <dave@hallvw.clara.net>]

> Now dont't say I told you this, but if you remove that epoxy that is on
one end
> of the pressure sensor, You can adjust the mixture.

The later ones have a black cap that can be prised off with care.  As you
say, it's not an adjustment to make without the gas analyser equipment to
check you are doing it right.  i.e. Don't try this at home!

Dave.
UK VW Type 3 & 4 Club
http://www.hallvw.clara.co.uk/
------
----- Original Message -----
From: Russell Wolfe <russella@netins.net>
To: <type3@vwtype3.org>
Sent: Wednesday, June 14, 2000 11:12 AM
Subject: Re: [T3] Radar Detectors



-------------------------------------------------------------------
Pitch in!  Send your pledge of support!  mailto:support@vwtype3.org