Re: [T3] Radar Detectors

[Russell Wolfe <russella@netins.net>]

Now dont't say I told you this, but if you remove that epoxy that is on one end
of the pressure sensor, You can adjust the mixture. It changes the preload on
the bellows. We used to have a machine at the dealer, that would allow us to
still keep it in emmision specs while adjusting it. 
Wish I had that piece of test equipment now. It was a very good diagnostic
tool. You even got a display of the individual injectors in milliseconds.

Russ Wolfe
http://www.wolfenet.net

On Tue, 13 Jun 2000, Keith Park wrote:
> The 69 "B" pressure sensor is a plug in replacement for the E unit.
> you "may" lose some of the altitude compensation but up to several thousand
> feet Ive had no problems.  It WILL eliminate the hesitation off the line and
> reduce gas mileage by about 1 MPG as it runs things just a tad richer.
> Better HP and the engine runs cooler without detonating as easily.
> 
> Keith
> 
> 
> 
> -------------------------------------------------------------------
> List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org