RE: [T3] Mounting the full flow filter

["Jim Adney" <jadney@vwtype3.org>]

On 22 Aug 00, at 7:22, Erkson, Toby wrote:

> I'd like to SEE where Jim A. has located his filter.  I'm not sure I
> understand where it is mounted.

Hard to describe. It's on the rear face of the left side of the 
crossbar, with the filter hanging down and about 30 deg left of 
vertical. The lines loop over the top of the crossbar and end up 
running just in front of the crossbar to where they join up with the 
engine. The HARD part is making the plumbing connections that 
go from the filter base over the top of the crossbar; this part is all 
soldered copper fittings and requires just the right fittings to make 
it work. The fittings end up with 3/8" hose nipples that fit into 
regular rubber lines.

I get a different filter base from Berg. The normal base has the 
ports coming out the side, but I found that I could adapt better with 
one that has the ports on "top."

I should see if I can take a picture and send it to someone to post.

-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org