[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 22 Nov 99, at 21:17, Chad wrote:
> I was putting in my new rear seat covers, and i ran into a snag.....
>
> I got the bottom in fine....but how are you supposed to get the top of the
> seat to stay attached? It has a plastic strip sewn onto the material, but it
> wont go into the grove, and if it does, it wont stay for long. A little tug
> and it pops right out. The old cover I took off(aftermarket) had a wire
> holding it in.
I don't remember the rear seat backs specifically, but VW
commonly used the wire run thru the hem to hold things together.
This method works quite well. When I come across these I re-use
the original wire, or replace it with a piece from a roll of electric
fence wire (galvanized iron) that I have.
Jim
-
Jim Adney jadney@vwtype3.org
Madison WI USA
-------------------------------------------------------------------
Search old messages on the Web! Visit http://www.vwtype3.org/list/