[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 24 Oct 99, at 7:16, Andrew Davidson wrote: > I bought some secondhand door seals from a wreckers > and I have some questions about fitting them to my 71 > fastback: > > 1. They are a bit dirty and they have some old glue on > them, what type of solvent should I use to clean them > ? I would avoid solvents because they might be hard on the rubber. Dirt will wash off with soap and warm water. > 2. What should I use to remove the old glue from the > door when I rip off the existing worn out seals? Usually you can rub with your fingers or scrape with a piece of wood. These may work on the "new" seals, too. If you try a solvent, make sure that it doesn't take off your paint. > 3. What type of glue should I use to fix them in > place? 3-M weatherstrip adhesive works very well. I don't know if you can get it "down under." > 4. Is there any moisturising agent or lubricant which > will prolong the life of seals? Avoid all petroleum products. Silicone sprays are good. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe