[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 7 May 99, at 23:06, Chad wrote: > Im at the point in every T3's owners life when the inevitable question comes > up-to lower the front or not. Well, my notch's P.O. lowered her ALOT. > I want to raise the front *a little*.I was looking in one of my manuals I > got off e-bay and they showed a puller to remove the torsion arm. What kind > of puller has anybody used to do this? I need to do it at this point, as I > have new KYB's for all 4 corners and all the fenders are off, so what better > time!? Read the Bentley and get VERY familiar with the test and pictures. Read Keith's FAQ on front axles. A VW tie rod end puller is very useful here, and a torch, too, but I don't think there is any puller needed to get the torsion bar out. It it is rusted in place, that is another problem, and you may well need to take the bar/arm to a machine shop to have the rust bond broken. This job is a lot of work. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org