[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 11 Jun 99, at 7:18, Jaime Gurrola wrote: > But the conundrum is this: The distributor I removed was pointing in a > SW direction when I had the engine at TDC, #1 cyl. I double checked > that it was #1 at TDC. I then installed a known typ3 distributor and > now the rotor is aimed in a SE direction or #2 cyl as it's now wired. > The Bentley doesn't state specifically but The Idiot Manual says #1 > should point NW. I have three different orientations here. I checked > the distributor slot in the engine and it is as the Bentley manual shows > exactly. On all the type 3 dists that I am familiar with, #1 points to the RR (SE?) I'm not sure, but I wouldn't be surprised if type 1 dists were different. That is probably what Muir was thinking about. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe