[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 27 Jan 99, at 22:05, Roby Ballard wrote: > The ignition switch is the main problem on my old > column. I couldn't get the key to turn. When I removed the switch from the > column, I found that the small white plastic cap at the rear of the switch > appeared melted. When I removed this plastic cap I could get the key to > turn normally (w/ switch removed from column). When I re-installed cap to > switch, again the key would not turn. > > This and the fact that there is an aftermarket steering wheel on the > column and whoever installed it mutilated the horn setup (no wire, button, > or anything else.) I bought the additional Fasty strictly for parts and > this is my first step. This being the case, you will find it MUCH easier to just transfer over the parts you actually need: ignition switch, steering wheel, and, possibly, turn signal switch with horn contacts. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org