[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Parting 71 Fast (rusted out)


Jim,

How would we with header systems on our T3's go about hooking up this
little fresh air mixer? I believe you are talking about the small 
1" or so pipe that runs into the heater area? Any thoughts would be
appreciated.

Regards,
Tom Cloud
'69 Fastback!

>From: "Jim Adney" <jadney@vwtype3.org>
>To: type3@vwtype3.3Êš1e: Wed, 10 Feb 1999 21:39:10 -0600
>Subject: Re: [T3] Parting 71 Fast (rusted out)
>
>On 9 Feb 99, at 11:48, Forsman/Harris wrote:
>
>
>If you drive with good heat exchangers but no cool air hoses and use 
>the heater, then the thermostats will open and dump hot air outside. 
>Since no cool air come in when this happens the temp in the mixing 
>box can get high enough to pop the bellows thermostats. The fresh air 
>hoses are important. Make sure yours are in place.
>
>Jim
>-
>*******************************
>Jim Adney, jadney@vwtype3.org
>Madison, Wisconsin, USA
>*******************************
>
>-------------------------------------------------------------------
>Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe
>
>


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]