[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Correct! Exactly my experience, when I installed a T3 tranny in my T1 bug some years ago... /Karl-Olov Sandin > -----Ursprungligt meddelande----- > FrŒn: Dana Hall [SMTP:dhall@inco.net] > Skickat: den 10 februari 1999 18.53 > Till: type3@vwtype3.org > €mne: Re: [T3] Type1 tranny in my Type3 > > Stan Schaefer wrote:KÃ¥> The trannys are mechanically identical, same internals can be used in > > either. The difference is in the final gear ratios. I think Muir has > > a run-down in the back of the book as to final gearing per year. > > Don't have it handy right now, but I know I've got that chart > > somewhere. Since the later T3s don't have a cradle mount, that > > feature and those holes are deleted from the casting in the > > bellhousing area. If you have the proper nosecone, a T1 tranny should > > work just fine, even though it isn't cosmetically the same and the > > final gearing will be different. > > > Isn't the "hockey stick" The shaft that comes out the snout of the > transmission different between the type 3 and the type 1?. I had to > change mine because the little dimple in the shaft that the setscrew > goes into was on the bottom of the shaft for the type 3 and on the top > for the type 1. Or did the guy that sold me the transmission sell me > something strange? > > Dana Hall > > ------------------------------------------------------------------- > Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe