[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
-----Original Message----- From: loggia <loggia@bellsouth.net> To: Edmond Dantes <phydeaux@home.com> Date: Sunday, December 26, 1999 2:42 PM Subject: Re: [T3] Can't find a part. >I believe you are working with the fuel pump,I tried to answer a few of your >questions below, >-----Original Message----- >From: Edmond Dantes <phydeaux@home.com> >To: It's a list <type3@vwtype3.org> >Date: Saturday, December 25, 1999 11:40 PM >Subject: [T3] Can't find a part. > > >>71 FI square. >> >>While trying to find my intermitent problem in what I've come to believe is >the >>fuel circuitry I discovered that the wiring diagram in the bently is >incomplete. >> >>J16 is there with a white and yellow wire from terminal 87 that ends at a >>notation saying J17.-Goes to fuel pump relay >> >>Problem 1. J17 is nowhere in the wireing diagram. Hell, the fuelpump >isn't >>even there.-Look at fuel pump sender,from there look left,black and red >wire with j-17 above it >> >>Problem 2. The wire in my car from J16 terminal 87 is blue and white. Is >this >>a PO or factory change.-this is right,but have seen others used >> >>Problem 3. Where is J17 in the car?-wire j-17 runs from the fuel inj power >supply relay(j-17) to the fuel pump relay(under dash),connector 86.from fuel >pump relay connectors #30 to main fuse panel connection #11 for power to >fuel pump. >> >>I also found a connector under the dash hanging loose. >> >>It looks like this (yea, ascii pics) >> >> black--OO--red >> white--OO--blue >> green--OO--(empty) >> >>The green one went through the firewall-through the trunk-through the >bottom >>front right corner of the trunk to somewhere I couldn't see, even looking >>through the bottom. >> >>The black one is always hot and none of the others are even when the car is >>turned on. What is it and where should it go? >> >>An entirely diferent problem. >> >>I have to turn the key several times to unlock the drivers side door. The >>interior latch feels fine. I'd like to know if I should be looking for new >>parts before I start removing the panel.-remove panel,clean and lube all >parts,while in car,straten the door lock button wire,should work good, >> >> Keith Loggia in the upstate of SC >> >> >>Edmond Dantes >>phydeaux@home.com >> >>------------------------------------------------------------------- >>Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe >> >> >