[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Hello... UPS man just came. He brought my(her) new rear 'glass fenders from Innovations. Upon preliminary inspection, the following points noted: -has the wobble when you hold it in the middle, like orig. fenders. Mine were loaded w/bondo, and living in Hawaii, thats not good. -some trimming of "flash" around edges, particularly in rear. -all holes covered. But theres little dimples where they are. Bolt holes, axle hole cover thingies there( using a hole cutter to make it perfect.), chrome trim holes there on one, the other arent. The tail lite holes are covered too, so what I did was to hold the lite up to the space where the holes are, line it up the best I could, and *lightly* with a drill, make a small hole on just the surface. When I cut the rest out, I will leave "bars" of 'glass across to mount it too. Overall fit looks good. Held them up and it was almost there. I will be re-inforcing these like I did the pans with fiberglass and resin. Needs minor finishing on the outside. Sorry for the ramble.... Chad 65 notch just got a little greyer. ÛÁdº------------------------------------------------------------ List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org