[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 8 Sep 98, at 21:32, John M. Kowalski wrote: > What is the proper length (in/cm) of the front to back brake line? My notes say 87 inches required. I think I had mine made up an inch longer. You might be able to save yourself some trouble and buy a short metric line and a coupler and replace yours in two pieces. > What is the proper size of the male threaded ends that screw into the MC? > This is a '65 Variant. The ends on the new brakeline look like they have > a larger thread than what the MC and brake couplings on the car will > accept. I'm not sure, but I don't think VW ever changed the size of this thread. At least all the late (68-) cars use M10x1 fittings. Since you're in Europe this should make a metric bubble flare coupler easier to find if you want to go that route. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/