[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] 73 Front Brakes on a '70


OOhhh  Ohhh..  is there a full moon??  Jim, your slippin a little
tie rod ends ARE different... bigger studs and a coarser threads  The
master.. well I cant say absolutely for sure but when I went to big brakes
and didn't change the master I had a low pedal, had to pump twice to get it
where it shold be. acted like it needed more fluid disp.. yea I had
everything adjusted and even tried 2 different masters but when I went to
the 73 master all was well and has been for 98Kmi        So I cant say for
absolutely for sure.. OK.. Jim , you win the Master debate, if the [pistons
are the same dia,, it shouldnt make a difference.

Keith

----------
> From: Jim Adney <jadney@vwtype3.org>
> To: type3@vwtype3.org
> Subject: Re: [T3] 73 Front Brakes on a '70
> Date: Wednesday, November 25, 1998 5:49 PM
> 
> On 24 Nov 98, at 18:52, Keith Park wrote:
> 
> > Need 72-3 spindles, rotors,pads, outer tie rod ends, master.
> 
> Yes, I forgot to mention the rotors and pads, but the tie rod ends 
> and MC are the same (well the MC changed, but not for this reason.)
> 
> Jim
> -
> *******************************
> Jim Adney, jadney@vwtype3.org
> Madison, Wisconsin, USA
> *******************************
> 
> -------------------------------------------------------------------
> List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]