[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 17 Nov 98, at 2:13, S1ckb0y13@aol.com wrote: > Clutch pedal feels much stiffer, like it doesn't > want to go down all the way, used to go down smoothly. Car starts fine, but > refuses to go into gear, even with clutch forced all the way down, can find > all gears with the engine off though. Disk and pressure plate replaced 4 years > ago, cable 6 mos. old and looks fine, It is obviously some kind of clutch problem, so you will probably have to pull the engine to find/repair. I would suggest that you start by watching the motion of the clutch arm where it goes into the bell housing just to make sure that is working okay. Things to look for: throwout bearing cross shaft arms, cross shaft bearings, throwout bearing spring clips, pressure plate. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org