[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Richard, I don't know if the '73 vent wing frame will fit in your '67, but from seeing both, they look to be basically the same. Measure the opening for the vent wing glass to see if there is a difference there. There would not be any hidden differences inside the door. It is not difficult, but it will be time consuming. You first have to remove the interior door panels and then the plastic sheeting (if still in your doors) before you will even be able to see where the window attaches to the window raising mechanism. If your window is attached to the mechanism, but still falls open, then that might mean that your window mechanism is defective. You may want to keep the one from the '73 pretty close just in case you also need to replace that. Hints? Take it easy. Replace the felt window channel (the longest piece on the rear of the vent wing frame) while got everything apart. Grease well the window mechanism. Put plastic sheeting back on your door before you install the trim panel. Wash your hands before reinstalling the door panels. Good luck and see you guys soon (24 days and counting)! John Zagreb, Croatia