[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Ben R Lowry wrote: > I was putting in new brake pads when I noticed that the pads were WAY > too > thick to fit in the gap between piston and disc. Ben, besides making sure that the pistons are fully pushed back into the calipers (as the other post from Peter Parker said) make sure you didn't get pads for a disc that has been resurfaced. They'll be just a bit thicker, just enough to drive you nuts trying to figure it out. Don't laugh, it happened to me with the El Cheapo brand of pads. David Walters '73 1600 L Notchback S. FL, USA