[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 6 Mar 1998 11:24:32 EST MrRebel666 <MrRebel666@aol.com> writes: >I got the engine in, hooked everything up, adjusted the valves, point >gap and >timing. > >I started it up, and the generator light came on....and didn't go off, . So i shut it off and went around back to see if >i could >tell what was wrong......it was smoking a bit!!! i looked to see where >the >smoke was coming from, but i couldn't tell..."After the smoke cleared" >i >checked the connections to the generator and the belt tension, which >were all >correct..i checked the brushes which were also okay... > bought). > >I definetly won't start it again, until i can figure out what's going >on. > >Thanks. >Robert. > did you polarize the generator/regulator? Scott _____________________________________________________________________ You don't need to buy Internet access to use free Internet e-mail. Get completely free e-mail from Juno at http://www.juno.com Or call Juno at (800) 654-JUNO [654-5866]