RE: rough idle and Relays!

[RJ Latherow <RJLATHEROW@atlantic1.com>]

Oh, my bad.  I meant the connector- its a 1/4 square in cross section,
and ~2 1/2 inches long.  The normal spade connectors are inside- and its
just long enough so that when you DO have to separate it, you have to
tug on the wires, not the connectors like we're supposed to, usually
meaning you pull the wire off and have to get your needle nose pliers
and go re-soldering.  The actual lead comes out of the loom, into this
connector box, and over to the big computer bundle.....

-rj

> -----Original Message-----
> From:	HBakr@aol.com [SMTP:HBakr@aol.com]
> Sent:	Tuesday, July 14, 1998 4:00 PM
> To:	RJLATHEROW@atlantic1.com
> Cc:	TYPE3@VWTYPE3.ORG
> Subject:	Re: rough idle and Relays!
> 
> In a message dated 98-07-14 14:51:19 EDT, you write:
> 
> << if you don't always get the click, then check the connector in the
>  engine. Its a single lead in a weird rectangular box >>
> 
> rj,by wierd rectangular box,do you mean the computer? or what exactly
> ?