[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Jake Kooser wrote: > > I've used a block of wood to wedge between the bellhousing and the > clutch arm before. You may also want to loosen the clutch cable as much > as possible without completely removing the wing-nut to give you more > room to work with. That's how I've been able to do it in the past, even > without the "other person". > > Jake Kooser Thanks Chad and Jake for suggestions. It turned out well today, if not a pain. * used a piece of twine to pull on the lever at the tranny, and then tied it off * pulled off the access plate near the gas tank * Baby took the wheel, while Ginger slowly lifted the clutch pedal and I slipped it over the hook Coming up next is the new Sewfine carpet. Mark my words, I will be driving again by the end of the month! Peter Parker '66 Square; Phillip Portland, OR