[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
You might want to check the bushings under the plate under the back seat i know there is a plate with screws and that part of the linkage should be there somewhere. Just thought i would say something >From Chris Swafford 537Buckeye 36LSB S.W. Corner of Cinti,Oh In the Hills 71'Beautiful stock Squareback half in primer 68'Vw Dead Beetle Needing rear tortion bar. 83'GTI Gone!!! NEVER BUY A 82-84 RABBIT On Wed, 04 Feb 1998 21:50:24 -0500 "Charles E. Whitney" <clncrew@erols.com> writes: >Hello All Again, > >I seem to have A LOT of play in my shifter. It is so loose that when >the tranny is in gear, it is difficult to tell if it is in neutral >during coasting. It just flops back and forth like crazy. I don't >have >problems shifting, or getting it to go into gears, but when I am >coasting to a stop, I can hard tell if it is in gear. > >Do I need to do some adjusting or tightening somewhere, or is the old >girl just showing her age? > >Thanks, > >Charlie > _____________________________________________________________________ You don't need to buy Internet access to use free Internet e-mail. Get completely free e-mail from Juno at http://www.juno.com Or call Juno at (800) 654-JUNO [654-5866]