[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
STOP!! You don't need to take everything out. If it's the nozzle, it can be removed by careful wiggling and twisting until the plastic tag closes up enough for it to pull out. The tube can then be removed from it, and tested to see if water can pour out. Blast water back through the nozzles the wrong way to clean them (or compressed air). If the nozzle is OK, you have a problem in the valve, a blocked or burst pipe. I assume you know the stock arrangement works with pressurised air in the reservoir under the front. There may be dirt in the narrow outlet in the water reservoir. Dave. UK VW Type 3&4 Club www.hallvw.clara.net/ -----Original Message----- From: A.m-T3lover <meshar@netvision.net.il> To: type3@vwtype3.org <type3@vwtype3.org> Date: 27 August 1998 17:06 Subject: [T3]No water camming out >Hay all. >I have to replace the water nuzzel (that thing that the water comming out >of it and >splash to the windshind), is ther any trik to do this without taking half >of the car out. >I have notice that the wipper motor right below it and i have to take out >the cd player >and wipper motor to rich it. > >Please help > >Assaf > >70' Notch > >P.S. remember the high rev cut off that I have - it was the ignion wires. > >------------------------------------------------------------------- >Search old messages on the Web! Visit http://www.vwtype3.org/list/ >