[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 6 Aug 98, at 13:34, Douglas_Brashear@mail.amsinc.com wrote: > My guess is that the top of the "T" fits inside the oil pump > *somehow*...the U-shaped bracket is then placed onto the stud (now sticking > out of the oil pump) to the two ends (the tops of the "U") touch the case > on either side of the oil pump...the nut is threaded onto the stud and > tightened to pull out the pump. Does that sound correct? Your guess is correct, but you should know that there are two different T's: one for the early small hole pump (-69) and another for the late large hole (70-) pump. If your puller doesn't fit you may have the wrong one. I had to fabricate a larger T for the early puller I bought years ago. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/