[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
At 07:31 11/17/97 -0500, you wrote: >I have always had trouble getting my wiper arms to stay fixed on the wiper >motor shafts. Even in the 60's and 70's when my VW's were relatively new, >one or both arms would work loose. I've tried tightening the set screws, but >the shafts are deteriorating from wear and rust. I hate to buy new wiper >motors because the old ones still work great. But I can't get the arms to >stay on!! Anyone had luck with this problem? > I drilled a hole about the same size as the screw into the shaft. Only about an 1/8 inch deep, just enough to give the screw something to hold onto. Later, Marty Marty Gray |Without Weapons the pinball@camalott.com | Air Force is Just Abilene, TX | Another Airline 96 Dodge Ram / 68 VW Fastback (The Egg)