[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>I was driving the '73 squareback today, and it was running like CRAP!! >2) Does anyone have a spare rubber "elbow" that's in good shape? The one >that goes from the air cleaner to the air intake distributor? What about >the rubber piece that goes from the car body into the air cleaner? > >3) I know we covered this recently, but has anyone fabricated a new fuel >injection wiring harness? I guess my main problem would be to replace the >connectors on the number one and two injectors...is this going to be a big >problem? > >Thanks to everyone in advance. -Mark > > In regards to number 2, I have been searching for both of these items for the last few weeks. I keep getting the same story that they are not available anymore and I should try a junk yard. They are in the Rocky Mt Motor Works catalog but they don't have them. Let me know if you find anything else out. I too have considered re-wiring the FI harness. There was a message a while back that stated the part numbers for the connectors, so they are still available. I would then re do the thing with telfon wire and a big modular jack that I could disconnect easily for taking the engine out with one disconnection. Havn't commited myself to this project because I think it will consume a large amount of time and I still need to drive one of the cars daily and the other occasionaly. ------------------------------------- Craig Woolston '70 Sqback and '71 Fastback cwoolsto@ladc.lockheed.com