[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 11 Jul 97, Carlson Bryan J wrote:
> So the foam should be from the top of the cooler to halfway down the
> left end? The one that I have wraps all the way around to
> underneath the cooler, and the cooler that I removed did not have
> any foam. Also, I do not need the washers on my late model oil
> cooler bolts? Another Tom Wilson error, I'm afraid. I need to buck
> up the dollars for the Bentley manual.
The foam covers the top and the top left, as you say. It just peaks
out from underneath the sheet tin next to the oil pressure sensor and
stops at the seam on the end. It is only found where is is useful.
Yes, no washers on engines that have 10 mm holes in the case and/or
the cooler. I believe the Bentley manual has a bit of trouble with
this one, too.
Jim
---------------------------------------------------------------------
Melissa Kepner Jim Adney
jadney@vwtype3.org jadney@vwtype3.org
Laura Kepner-Adney
Madison, Wisconsin
---------------------------------------------------------------------