[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Thu, 10 Apr 1997, WALTEE wrote: >Date: Thu, 10 Apr 1997 13:24:00 -0400 >From: WALTEE <WALTEE@prodigy.net> >To: type-3@umich.edu >Subject: Brakes > >About those brakes, there is an adjustment to be made between the piston >on the master brake cylinder and the brake pedal. By removing the toe >panel, you can access the master cylinder pushrod. There should be a 1 >mm clearence between the pushrod and the master cylinder piston when the >brake pedal is in the resting postion. don't flame me for this please, as I have not seen this in either Muir or Bently, but how do you make this measurement? In my case, 1969 dual circuit. -- g-r-a-t-e-f-u-l-l-y---[ email:<fishbowl@conservatory.com> ]---l-i-v-i-n-g d-e-a-d-i-c-a-t-e-d---[ http://www.conservatory.com/ ]-----l-i-g-h-t "No job too big; no fee too big!" -- Dr. Peter Venkman, "Ghost-busters"