Re: Bare pan

[Toby Erkson <Toby_Erkson@ccm2.hf.intel.com>]

Vee-Dubs are much like humans -- very noisy.  I would recommend checking out a 
stereo magazine or shop and use sound deadening.  Unless you're going for 
stock...  While you're at it, you may want to check the heater channels.  These 
can collect water, rust, and cost you da big bucks to replace.  Check the shift 
tunnel, too.

     Toby Erkson
     air_cooled_nut@pobox.com
     modified '72 Squareback 2.0L
     stock '75 Porsche 914 1.8L


______________________________ Reply Separator _________________________________
Subject: Bare pan
Author:  type-3-errors@umich.edu at SMTPGATE
Date:    10/23/96 12:47 AM


Hi!!!  I have a 73 Fastback and need suggestions on what to replace
my "wet" tar boards with. My car was decorating an abandoned field
until I felt the need to help it (someone didn't roll the window up
though).  Believe it or not the pan is in great shape but I wanted to
get all the molded carpet and boards up.  I know there are replacement
boards for the Type I.  Will these work ok or is there someone that
makes these for the aftermarket????  Is anyone using anything else,
padding, sound deadening material or what????  Thanks in advance.
Larry Adkins
73 Fastback
lda@lex.infi.net