[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
We have replaced the 3 point harnesses for the front seats of our '71 SQB with just generic replacment units. They bolt into the existing holes (each side of the central tunnel hump, 3/4 way up the pillar behind the door and on the side near the base of the rear seat.) The new retractor housing sits in latter location and has to sit tilted towards the front a bit, but otherwise they work great. We also replaced the regular lap belts in the rear with the same type of 3 point harness. I had to weld a nut just above the rear fender well, beneath the window to mount the retractor units. The upper nut on the 'C' pillar was already there so it was a fairly easy modification. Dave -- Dave Burden | 1924 Studebaker Special Six Touring Car Digital Equipment Corporation | 1926 Studebaker Estate Wagon (hearse w/seats) Alpharetta, GA | 1957 BMW Isetta 300 convertible burden_d@warlrd.enet.dec.com | 1971 VW Squareback