[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[T3] Mustache bar differences?
- Subject: [T3] Mustache bar differences?
- From: max.welton.2k at gmail.com (Max Welton)
- Date: Thu, 16 Sep 2021 14:27:41 -0600
- In-reply-to: <CADD65r5kntQ7yEK-ZR9R3nQRzfBy6OkzY=S8WsnHQiYncDoo0A@mail.gmail.com>
- References: <CAFt5EJnzvUmejpBgxJNAqHWAe2bZ1JaA9CVVtOewRpb_X1tW=A@mail.gmail.com> <CADD65r7iVoD_mFfEv+4EUpUockUNrV_RRUp59_qf3=V7a3wtDw@mail.gmail.com> <CADD65r5kntQ7yEK-ZR9R3nQRzfBy6OkzY=S8WsnHQiYncDoo0A@mail.gmail.com>
On Thu, Sep 16, 2021 at 1:28 PM William Jahn <willjahn975 at gmail.com> wrote:
>
> I see from the video you are not using the stock muffler so I assume you
> are using some sort of flex tubing from the fan to the HE . I know on my 73
> the HE have the lip/flange and there is not much room between the bar and
> HE . Just enough to get the hose and clamp in. On the right side it's a bit
> closer if I recall.
Yes, CSP has flex tubing for that.
https://www.csp-shop.com/en/exhaust-heating/heater-hose-fan-shroudheat-exchanger-type-3-129-087-311f-24011a.html
Max