[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[T3] AN fittings
- Subject: [T3] AN fittings
- From: jadney at vwtype3.org (Jim Adney)
- Date: Sun, 30 May 2021 19:47:54 -0500
- In-reply-to: <000001d75563$dd793370$986b9a50$@nycap.rr.com>
- References: <000001d75563$dd793370$986b9a50$@nycap.rr.com>
Keith,
You might find an Aeroquip catalog informative. It covers all their hoses and
tells you which fittings are suitable for which hoses. They are NOT
interchangeable. There's quite a rabbit hole here.
Jim
On 30 May 2021 at 10:55, Keith Park wrote:
> Well I finally got the couple little oil leaks worked out and the engine
> clean when one of the cooler lines started gushing, well. a drop a second
> and you wont
>
> Get far that way. I AiNt got confidence in those AN fittings anymore,
> didn't like them when I put the hoses together and now.
>
>
>
> There appear to be 3 kinds for the braided stainless hoses:
>
> The one with the barbs
>
> The one with the straight nipple
>
> The one with the tapered nipple
>
> All 3 have the collar that the hose goes in and screws over the nipple end.
>
>
>
> The one that failed was the tapered nipple, it was fine till it let go, was
> still tight but the oil was dripping out where the hose entered it. I took
> it apart and didn't find any cracks in
>
> The rubber hose, but some of the rubber had thread grooves in them. The
> Utube videos all say to insert the hose in the collar till it bottoms then
> screw the whole thing on the nipple, and that's what I had done when I built
> these. and there was no evidence that the hose had backed out anyway.
>
>
> Frustrating, and a real worry for me cause if this had not been the worst
> Memorial day weekend weather in Albany (3 days of rain and at least 2 with
> record low maximums) I would have driven up to the camp yesterday and run
> all the oil out before I even knew I had a problem, and here I am trying to
> keep my eyes OFF the gauges.
>
>
>
> So I built up a new line with new hose, one end was the tapered nipple and
> the other straight, not sure why they supplied 2 different kinds when I
> bought the Setrab cooler but that's what I got.
>
>
>
> At least I had plenty of time to fix it this weekend stuck inside, but the
> bad weather may have saved a real disaster and another thing all the bad
> weather will give us is the chance
>
> To really remember why we celebrate memorial day, and have all the freedoms
> to drive our VW's anywhere we want, a hail to all those who have served and
> paid the ultimate price
>
> To give us those freedoms. Sometimes this is forgotten when the sun's out
> and your on the beach with a beer.
>
>
>
> Thank you to all our veterans and those who are serving!
>
>
>
> So, Anyone else have or heard of failures with the AN fittings??
>
>
>
> Keith
>
>
>
>
>
> Topnotch Restorations
>
> <mailto:topnotch at nycap.rr.com> topnotch at nycap.rr.com
>
> <http://www.topnotchresto.com> http://www.topnotchresto.com
>
> 71 Squareback "Hothe"
> 65 Notchback "El Baja Rojo"
>
> 93 RX7 "Redstur"
>
> 13 Subaru Outback "Blendin"
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20210530/0790eac2/attachment.html>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************