[T3] Antenna wire

[jadney at vwtype3.org (Jim Adney)]

On 16 May 2015 at 21:44, Ralph Tree wrote:

> I have a question concerning the routing of the antenna lead. I can't
> seem to get it to feed through the body, into the cabin. I found the
> small hole in the sheet metal under the outter fender but can't get
> from there into the cabin. Any help is appreciated. 

If you're thru the hole in the inner fender wall, you're into the 
cabin. The hole comes in quite high under the dash, so you may need 
to remove the fuse box to see it, and pull it on in.

BTW, you need a grommet around antenna wire to seal that opening once 
you've removed the rubber plug that was there. Otherwise, you won't 
believe the amount of water that wheel spray will pump into the cabin 
when you drive in the rain. (And everyone drives in the rain 
eventually.) The antenna should have come with a sealing grommet for 
this purpose.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************