[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[T3] Front axle beam question
- Subject: [T3] Front axle beam question
- From: jadney at vwtype3.org (Jim Adney)
- Date: Wed, 01 Oct 2014 20:08:17 -0500
- In-reply-to: <1F.2D.14033.5099C245@cdptpa-oedge02>
- References: <542C5146.18994.118A611@jadney.vwtype3.org>, <1F.2D.14033.5099C245@cdptpa-oedge02>
On 1 Oct 2014 at 20:15, Keith Park wrote:
> I must not be understanding this, there is a spec for how far the bearings
> go in if I recall right, then you just pop the seal in as far as it goes and
> walla, your done.
You're right, there is a stated spec for the bearing position, and
there is a depth of the seal, but those two dimensions allow for some
overlap, which is impossible. So the stated spec must be wrong.
The question is: What is the correct spec? There's no stop.
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************