[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[T3] Oil Bath
On 31 Mar 2014 at 2:48, Daniel K. Du Vall wrote:
> How much oil and type to fill an empty type 3 oil bath filter?
There is a "step" in the bottom of the air cleaner. Sometimes this is
marked with a red line. The bottom half should be filled just until
the step is covered.
> Also should it be rinsed out with something, if so what, prior to first use?
Just pour out the old oil, wipe the bottom, and refill. This does not
have to be done unless there is significant buildup of sludge residue
at the bottom of the old oil. You can tell this easily by just wiping
the bottom thru the old oil with a finger. For most of us, air
cleaner oil change will seldom be necessary. It will be necessary
more often if you drive in dusty areas.
One thing to be careful of, that most people aren't aware of, is that
you should be careful to NEVER turn the upper half of your oil bath
air cleaner upside-down. If that happens, dirty oil will drip into
the intake air passage. That's not something you want.
If there is caked dirt around the holes in the upper half, you can
scrape/wipe that off.
There's no necessity to really clean out any other part of this, but
the lower half can be washed out every 10 years or so, if you like.
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************
- References:
- [T3] Oil Bath
- From: dduvall at 1peter4-10.org (Daniel K. Du Vall)