[T3] Engine bolted in good news bad news

[emailjohnmorgan at gmail.com (John L. Morgan IV)]

leaking at the hose connector or wire??
replacing the end tips where the metal piece is riveted on is not hard to
do.

On Fri, Sep 28, 2012 at 10:26 AM, Dennis Stiefel <dlstiefel at dekalbk12.org>wrote:

>
>
> Good news bad news.  The good news is we got it to start.  The bad news is
> we had to shut it back off after about 15 seconds because the all 4 of the
> injectors were pouring gas out where the wires plug into them.  At first we
> thought it was loose hoses at the top of the injectors but after closer
> inspection we seen they are leaking at the wire connector.  I guess 32
> years
> of no action done them in.  Well now we are dead in the water till I can
> come up with another set.
>
> Dennis
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20120928/0709f87d/attachment.htm>