[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[T3] no start -- but just drove it!
- Subject: [T3] no start -- but just drove it!
- From: fisherfarms at gmail.com (Mike Fisher)
- Date: Sun, 12 Feb 2012 17:35:14 -0800
- In-reply-to: <CADvxetAxx0s3GUXvuFZp6WMyikrePef=UPhi2f_p=iV3ovWo3A@mail.gmail.com>
- References: <28cdb.667d2369.3c6968fd@aol.com> <CADvxetDZGN8Dn7sQTZeoyc+FHU8tpQwP=T1t_aNaonYCfY62pg@mail.gmail.com> <4F37F3FF.26779.1D89B3E@jadney.vwtype3.org> <CADvxetAxx0s3GUXvuFZp6WMyikrePef=UPhi2f_p=iV3ovWo3A@mail.gmail.com>
Did you test your fuel pressure for 30 lbs? There is a test port between
the pairs of injectors. I used a cheap water pressure gauge from Home
Depot/nipple/fuel hose/clamps to build mine. Russ told us it should only
pump about 1 quart per minute. Your fuel Return line could also be
plugged.
On Sun, Feb 12, 2012 at 4:20 PM, Bryon Garvin <spinningrooves at gmail.com>wrote:
> Thanks Jim,
>
> as you probably read later, I finally figured it out. I made the
> stupid assumption that the wire I saw on the solenoid the first time
> was the one from the front. I couldn't see the other terminal due to
> where I was. Also, I was screwed up a bit as to where the wall of the
> battery well was. It was farther forward and I kept thinking "why
> don't I see this wire exiting the interior??"
>
> Anyway, pointless to yap about it anymore. I'm feeling kinda dumb I
> didn't find the wire in the first place. I read the Bentley wiring
> diagram and still failed to figure out that I should be looking for 2
> wires up there in addition to the heavy battery wire.
>
> Thanks everyone for their help.
>
> - Bryon, '71 Fastback
>
> On Sun, Feb 12, 2012 at 3:16 PM, Jim Adney <jadney at vwtype3.org> wrote:
> > On 12 Feb 2012 at 11:41, Bryon Garvin wrote:
> >
> >> Only question left is: Which terminal on the solenoid is for the
> >> ignition wire and which is for the ECU testing point. Or does it
> >> matter? I can't tell if those two terminals are connected, in which
> >> case it doesn't matter. But if it does matter, will someone tell me
> >> which goes on which?
> >
> > Use your voltmeter or test light to see if either has voltage on it
> > with the key off. If both are dead, they are interchangable. If only
> > one is dead, the wire from the front connects to that one.
> >
> > --
> > *******************************
> > Jim Adney, jadney at vwtype3.org
> > Madison, Wisconsin, USA
> > *******************************
> >
> > _______________________________________________
> > VWType3.Org mailing list - type3 at vwtype3.org
> > http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> > Contact gregm at vwtype3.org if you need help with the list.
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>
--
Eugene, Oregon
http://s169.photobucket.com/albums/u236/mr_bojangles500/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20120212/c699e141/attachment.htm>