[T3] Lifters that wont rotate

[topnotch at nycap.rr.com (Keith Park)]

Yes, makes for some real easy valve adjustments

Keith

correct 'zero lash' on steel pushrods is that they can still spin with
finger pressure while not being able to get a .001" feeler gauge in there.

On Mon, Aug 27, 2012 at 10:27 PM, Jim Adney <jadney at vwtype3.org> wrote:

> On 27 Aug 2012 at 21:59, Keith Park wrote:
>
> > Anyone ever run into lifters that don't rotate?  In my T4 3 of the 4
> Exhaust
> > lifters aren't rotating, which is really odd. the bores aren't worn, the
> > lifters have been in 2 different cases now and don't rotate in eather.
> they
> > slip in nice and smooth but the wear patterns on them are quite
> directional.
> > Im worried, but what could possibly cause this?? They have about 5Kmi on
> > them now between the 2 cases.
>
> I've never seen it, but it certainly seems possible. Once it happens,
> they must get a bit of a groove worn in them that would keep them
> from rotating from then on. Your only choice would be to replace the
> lifters, at least the bad ones.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>



-- 
Brian Fye
Canyonville Christian Academy
541 839 4401 ext. 110
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20120827
/2ca2c7b0/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.