[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[T3] Lifters that wont rotate
- Subject: [T3] Lifters that wont rotate
- From: jadney at vwtype3.org (Jim Adney)
- Date: Tue, 28 Aug 2012 00:27:29 -0500
- In-reply-to: <EF57A84027F4482CBEC5163A280905D9@NORM>
- References: <8F5A603AF435492AAA8486B6C9800071@NORM>, <1346120421.94596.YahooMailClassic@web112317.mail.gq1.yahoo.com>, <EF57A84027F4482CBEC5163A280905D9@NORM>
On 27 Aug 2012 at 22:59, Keith Park wrote:
> Well the geometry has been set up properly if that?s what your
> referring to. This setup uses the 911 adjusters with zero lash chrome
> moly pushrods.
I don't have any real world experience to go on, but I really dislike
the whole idea of steel pushrods. My long term objections are to the
wrong thermal expansion, but your experience may point out another
problem: Is it possible that the rotation is partly dependent on
there being some free play, in addition to the offset with the cam?
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************