[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[T3] Stock cylinder kits
- Subject: [T3] Stock cylinder kits
- From: jadney at vwtype3.org (Jim Adney)
- Date: Sun, 19 Aug 2012 22:39:42 -0500
- In-reply-to: <15FA951A388E4400BA1BC04782D36FB9@NORM>
- References: <4FB2DE510C934287A7C94CA17C0AFF45@NORM>, <5030A024.16866.140444@jadney.vwtype3.org>, <15FA951A388E4400BA1BC04782D36FB9@NORM>
On 19 Aug 2012 at 11:08, Keith Park wrote:
> I am indeed interested in the 1500 cylinders, I do have a set of flat top
> pistons and rings.
Well, I looked and I can't find them. It's possible that I threw them
out 20 years ago, but I don't think so. They may still show up in
another corner of my mess.
> Now that everything is tuned up Ill have to see if that low RPM miss and
> slightly ratty idle is still there with the Mark 10, the idle was smooth
> when I was adjusting it yesterday but the engine had not warmed up fully
> yet.
I thought the miss disappeared once you replaced the worn out VR, or
was that a different car?
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************