Re: [T3] lowering question

["Jim Adney" <jadney@vwtype3.org>]

On 27 May 2011 at 20:49, David Fox wrote:

> I need some information or a link to a site that will show me the distance that 
> will change on each spline.

The Bentley manual will tell you how many teeth there are at each end 
of each torsion bar (inner and outer are different.) Divide 360 by 
that number; that tells you how many degrees you get for each tooth.

Measure the length of the trailing arm, from center of the torsion 
bar to the ~center of its ball joint. Divide that length by 57.

Multiply that number by the number of degrees to get the approximate 
change in height.

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.